MelaColl™ HPMC GRADES AND USES: Which product is your favourite?
Melacoll2023-06-09 17:11

MelaColl™ HPMC series have different viscosity and properties. HPMC is a versatile chemical addictive. Its uses include three ways: construction, daily chemical, food, and pharmacy. In this article, we will talk about Melacoll HPMC grades and uses.

MelaColl™ HPMC’s raw material is refined cotton. The refined cotton endows HPMC with good thickening properties. This is twice that of ordinary people. So it ensures Melacoll HPMC‘s viscosity is higher than DOW or Ashland and Lotte.

hpmc

Melacoll Processus de fabrication du HPMC is through etherification between propylene oxide, Chloromethane, and another chemical. Melacoll provides a complete supply chain. Its headquarter is in Dallas, Us. The US lab continues to innovate and research new products. We have many experienced R & D personnel. Besides, keep pace with market demand. Put the customer's opinion first.

Our customers are mainly engaged in the construction industry. Like tile adhesive, and wall putty. joint compound, Melacoll HPMC will play a good function. Learn more about Melacoll HPMC grades and uses that can ensure produce good use effects. We have another blog with some questions about cellulose ether and RDP grades from our customs.

hpmc_1

Of course, Melacoll continues to upgrade formulas, like tile adhesive formula or wall putty formula. Adopt different HPMC grades to pursue application tests. Using this way to test Melacoll HPMC quality. There are so many HPMC grades in Melacoll. This article mainly focuses on MP 400, MP 20000, MP 45000, and MP 70000.

 

1.MELACOLL HPMC GRADES AND USES

MELACOLL HPMC GRADE

  1. MelaColl™ MP 400

MelaColl™ MP400 is a non-ionic, water-soluble cellulose ether. Its viscosity is low, but it can provide good correction and fluidity. This feature is very practical for self-leveling. Self-leveling mortar is the free flow of cement slurry according to the height of the terrain to achieve a high leveling effect.

Appearance: white or off-white powder
Moisture: ≤5 %
Ash: ≤5 %
Methoxy content: 19-24 %
Hydroxypropyl content: 4-12 %
PH value: 6-8
Particle size: 99% pass 80 mesh
Viscosity: 300-500 mPa.s (Brookfield RV, 2%)
Delayed solubility: No
Final consistency: Low
Sag resistance: Low

MelaColl™ MP 400 utilizes self-leveling to have the following advantages:

Ensure the fluidity of self-leveling mortar

Form a smooth surface

Reduce shrinkage and increase load-bearing capacity

Improve the adhesion between self-leveling mortar and base

  1. MelaColl™ MP 45000

MelaColl™ MP 45000 is a non-delayed dissolving hydroxypropyl methylcellulose. After dissolving in water, it plays a role in various properties. Wide range of applications, including colles à carreaux, putty, fillers, insulation systems, gypsum base, etc. This requires him to have moderate sag resistance and thickening properties. The viscosity range of this product is between 40000-55000.

Appearance: white or off-white powder
Moisture: ≤5 %
Ash: ≤5 %
Methoxy content: 19-24 %
Hydroxypropyl content: 4-12 %
pH value: 6-8
Particle size: 99% pass 80 mesh
Viscosity: 40,000-55,000 mPa.s (Brookfield RV, 2%)
Delayed solubility: No
Final consistency: Moderate
Sag resistance: Moderate
Thickening effect: Moderate

This product has the following advantages:

Enhance the thickening effect

Improve adhesion. When used in tile adhesive, it strengthens the adhesiveness between the tile and the substrate and prevents the tile from hollowing, slipping, and cracking.

Improve water retention and prolong open time

  1. MelaColl™ MP 70000

MelaColl™ MP 70000 is also a non-delayed dissolution hydroxypropyl methylcellulose ether. Its viscosity ranges from 65000 MPa to 75000 MPa. MelaColl™ MP 70000 has good anti-sagging properties. Excellent water retention and high tile adhesion. Customers are mainly used in Tile adhesive, Concrete adhesive; EIFS adhesive; Gypsum adhesive..

Appearance: white or off-white powder
Moisture: ≤5 %
Ash: ≤5 %
Methoxy content: 19-24 %
Hydroxypropyl content: 4-12 %
pH value: 6-8
Particle size: 99% pass 80 mesh
Viscosity: 65,000-75,000 mPa.s (Brookfield RV, 2%)
Delayed solubility: No
Final consistency: High
Sag resistance: Excellent
Thickening effect: Excellent

A thickener, binders, surfactants, protective colloids, suspending agents, and water retention agents in many construction materials.

  1. MelaColl™ MP 20000

MelaColl™ MP 20000 is a non-ionic, water-soluble hydroxypropyl methylcellulose. Its viscosity is about 15,000 to 25,000. It belongs to non-delayed dissolution. Can be used for tile adhesive, putty, caulk, etc. When used in caulk, it will help remove almost all imperfections from sentimental surfaces.

Appearance: white or off-white powder
Moisture: ≤5 %
Ash: ≤5 %
Methoxy content: 19-24 %
Hydroxypropyl content: 4-12 %
pH value: 6-8
Particle size: 99% pass 80 mesh
Viscosity: 15,000-25,000 mPa.s (Brookfield RV, 2%)
Delayed solubility: No
Final consistency: Moderate
Sag resistance: Moderate
Thickening effect: Moderate

2. Melacoll HPMC viscosity table

Grade Viscosity (mPa.s, 2% sol.) Application Propriétés
MP400 300-500  Nivellement automatique  Excellent liquidity & Extend open time
MP10000 9000-15000 Render Less retardation of cement hydration & Good workability
MP20000  15000-25000 Tile adhesive; EIFS; Plaster; Joint filler; Grout; Repair mortar Good workability & Good sag resistance
MP30000  25000-40000 Tile adhesive; EIFS; Gypsum finishing plaster; Joint filler; Wall putty; Render Good workability & less lump formation & Good sag resistance
MP45000  40000-55000 Tile adhesive; EIFS; Gypsum machine plaster; Wall putty; Water-proofing mortar  Excellent workability & Extended open time
MP50000 50000-65000 Tile adhesive; EIFS Good sag resistance & Excellent workability
MP70000 65000-75000 Tile adhesive, Concrete adhesive; EIFS adhesive;Gypsum adhesive   Good sag resistance & Excellent water retention & High adhesive strength

 

In addition, we have other HPMC grades and applications. And we are developing new product formulations, and updating new product grades and usage. Please follow our latest blog content. If you have any needs, you can contact our sales staff.

avatar

Posté par Melacoll

Bonjour, je travaille dans l'industrie des éthers de cellulose depuis 11 ans. ans.

Laissez une réponse

melacoll

+86 531 87919350 (heure de Pékin : 9:00-17:00)

melacoll@mikem.com (bureau en Chine)

RDdept@mikem.com (bureau de R&D aux États-Unis)

Bureau en Chine : Jinan University Science Park, No.988 Shunxing Road, Jinan, Shandong, Chine.

Siège social : 5955 Alpha Rd #1209 Dallas, TX 75240

Un véritable partenaire commercial.

Laissez-nous vos questions, nous vous contacterons dans les 12 heures. Veuillez prêter attention à l'e-mail.

Contactez nous

Copyright © 2020-2023 Melacoll | Tous droits réservés.
fr_FRFrench