타일 접착제에 HPMC 적용

1. What is the Tile Adhesive?

Tile adhesives are compounds used to stick tiles to walls or floors firmly. Fortunately, the application of our MelaColl HPMC in tile adhesive can improve all the features of tile adhesive to satisfy all demands in construction. Therefore, tile adhesive is expected to fix the tiles not just for several years but for decades without failure. It must be easy to use and should not have any gaps between the tile and the substrate.

2. Properties of HPMC

Hydroxypropyl methyl cellulose(HPMC)or hypromellose is a water-soluble non-ionic cellulose ether polymer. The chemical properties can vary according to the degree of substitution and modification. With good performance of thickening, dispersion, emulsification, suspension, adsorption, surface activity, and water retention, our HPMC products are widely used in tile adhesives.

3. Why use HPMC in tile adhesives?

The primary function of HPMC in tile adhesives is water-retaining and thickening. The purpose is to increase the final solidification strength of the tile adhesive, extend the open time, and improve its workability. Usually, when we evaluate the performance of tile adhesive, in addition to its workability and anti-sliding ability, we also pay attention to its mechanical strength and open time.

3.1 Effect to the open time

In a wet mortar, the water in the mortar will evaporate, and then cellulose ether will be gathered on the surface. A film will form on the mortar surface within 5 minutes, which will reduce the subsequent evaporation rate. Therefore, hydroxypropyl methyl cellulose (HPMC) can extend the opening hours.

3.2 Effect to the pull strength

HPMC can also delay the hydration kinetics of cement. This retardation is mainly due to the absorption of HPMC molecules by various mineral phases in the hydrated cement system. Specifically, HPMC molecules are mainly adsorbed on hydration products, such as C-S-H and calcium hydroxide. Besides, due to the increase in the viscosity of pore solutions, HPMC reduces the mobility of ions (Ca2+, SO42-, …) in the pore solution, thereby further delaying the hydration process. Therefore, HPMC in tile adhesive can extend the tensile strength of tile adhesives.

4. MIKEM Product Recommended for Tile Adhesive

4.1 MelaColl HPMC in Tile Adhesive

Tile adhesives are one of the most extensive applications of our MelaColl HPMC products. We provide economical, standard, and premium grades of products for tile adhesives. These different grades of products contain different amounts of MC and therefore, providing differing properties (for example, open time, sag resistance).

4.2 Improved Features of Tile Adhesive by MelaColl HPMC products

• 향상된 처짐 저항
• 향상된 작업성
• 향상된 접착력
• Improved heat and freeze thaw resistance
• 수분 보유력 향상
• Want highly matched HPMC product for your adhesive tile project? Just 문의하기 for more information about products or a sample! MIKEM are always ready to answer any of your question with one-to-one service and customized products solution!